Author Topic: X-Arcade Configuration for Ninja  (Read 1244 times)

Iriez

  • Administrator
  • Newbie
  • *****
  • Posts: 2
  • Karma: +0/-0
    • View Profile
X-Arcade Configuration for Ninja
« on: November 04, 2018, 06:20:01 PM »
Setup a Ninja install on a xbox with a x-arcade today and found out that KI is the only emulator that does not have a UI for configuring key mappings. The U64x.ini file is contained in /E/TDATA/64646464.

With a x-arcade set with the rear slider config all the way to the right if you have the x-aracde sitting in front of you, this should be the configuration to get KI/KI2 working as it should with L/M/H kick/punch for 123, 456. If your x-arcade is in a different config position these obviously wont work for you. But the legend should give you enough idea on how to re-map.

As I went through this I created a small legend to help figure out the buttons.

x    k   (left is x-arcade button #, right is ki # as it is in the ini. e.g. "m_PlayerMappings[0].dwFire[0]" with the dwFire 0 being the ki # and the number to the right being the button you want to assign.
1 = 2
2 = 3
3 = 5
4 = 0
5 = 1
6 = 4

Simply copy the below and paste it into the U64x.ini file located in the specified dir above via FTP -

Code: [Select]
// U64x Config File

// Don't edit this file manually unless you know what you're doing
// U64x will restore default settings when this file is deleted




// Player controls
m_GamepadConfig->m_ConfigMap[0] 0
m_GamepadConfig->m_ConfigMap[1] 0
m_GamepadConfig->m_PlayerMappings[0].dwFire[0] 2
m_GamepadConfig->m_PlayerMappings[0].dwFire[1] 3
m_GamepadConfig->m_PlayerMappings[0].dwFire[2] 5
m_GamepadConfig->m_PlayerMappings[0].dwFire[3] 0
m_GamepadConfig->m_PlayerMappings[0].dwFire[4] 1
m_GamepadConfig->m_PlayerMappings[0].dwFire[5] 4
m_GamepadConfig->m_PlayerMappings[1].dwFire[0] 2
m_GamepadConfig->m_PlayerMappings[1].dwFire[1] 3
m_GamepadConfig->m_PlayerMappings[1].dwFire[2] 5
m_GamepadConfig->m_PlayerMappings[1].dwFire[3] 0
m_GamepadConfig->m_PlayerMappings[1].dwFire[4] 1
m_GamepadConfig->m_PlayerMappings[1].dwFire[5] 4


// Video Options
nHardwareFilter 0
nCurrentFilters[0] 0
nCurrentFilters[1] 0
flicker 0
bSoftenDisplay 0
nCurrentVideoMode 0
d3dxoffset 16
d3dyoffset 12
d3dxscale 608
d3dyscale 456
kioskmode 0
showdebug 0
bCheatEnabled[0] 0
bCheatEnabled[1] 0
cheatenable[0][0] 0
cheatenable[0][1] 0
cheatenable[0][2] 0
cheatenable[0][3] 0
cheatenable[0][4] 0
cheatenable[1][0] 0
cheatenable[1][1] 0
cheatenable[1][2] 0
cheatenable[1][3] 0
cheatenable[1][4] 0

« Last Edit: November 04, 2018, 06:21:45 PM by Iriez »